Disinfectant Tablet
PathX Tabs
The everyday disinfecting tablet for hard, non-porous surfaces.
Drop one tablet into a gallon of water and it fizzes into a 1,076 ppm available-chlorine solution in a few minutes. Apply with a mop, trigger sprayer, pump sprayer or cloth and leave surfaces wet for 10 minutes.
The active ingredient, sodium dichloroisocyanurate (NaDCC), releases hypochlorous acid as it dissolves. You get the disinfecting power of chlorine without lugging, pouring and guessing at liquid concentrate.
At a Glance
Where It Goes
- Restrooms & fixtures
- Floors & walls
- Break rooms
- Locker rooms
- Trash rooms & carts
- Equipment surfaces
Specifications
| EPA Reg. No. | 71847-6 |
|---|---|
| Active ingredient | Sodium dichloroisocyanurate (NaDCC) 48.21% |
| Tablet weight | 13.1 g |
| Packaging | Tub of 256 tablets · case of 2 tubs |
| Use sites | Washable hard, non-porous surfaces |
Causes serious eye irritation. Keep tablets dry and sealed until use. Read and follow all label directions.
Disinfectant-Cleaner Tablet
PathX Tabs Plus
For drains, wet areas and the slime layer that keeps coming back.
Tabs Plus adds a surfactant to the same NaDCC chemistry, so one solution both cleans and disinfects. It works in trigger sprayers, pump-up sprayers and pressure washers.
Its label includes a biofilm claim: at 4,306 ppm with a 4-minute contact time it kills Pseudomonas aeruginosa and Staphylococcus aureus growing in biofilm on hard, non-porous surfaces. In floor drains, apply as a foam and allow 10 minutes.
At a Glance
Where It Goes
- Floor drains
- Commercial kitchens
- Showers & locker rooms
- Wash bays & docks
- Dumpster pads
- Pressure-wash jobs
Specifications
| EPA Reg. No. | 71847-7 |
|---|---|
| Active ingredient | Sodium dichloroisocyanurate (NaDCC), with surfactant |
| Tablet weight | 6.55 g |
| Packaging | Pail of 720 tablets |
| Application | Trigger or pump sprayer, pressure washer, drain foam |
Tablets per gallon vary by use. Follow the dilution table on the label. Causes serious eye irritation.
Ready-to-Use Hypochlorous Acid
Paerolyte
Hypochlorous acid, made from salt, water and electricity.
Paerolyte is made by electrolysis, which means passing an electric current through salt water. The result is hypochlorous acid (HOCl) at 500 ppm free available chlorine and near-neutral pH. It comes ready to use: nothing to measure, and no harsh fumes or residue for building occupants to notice.
Spray or wipe onto pre-cleaned hard, non-porous surfaces and keep them wet for 10 minutes. When it's done working it breaks down to salt water, which makes it a good fit for classrooms, offices, gyms and clinics during the day.
At a Glance
Where It Goes
- High-touch surfaces
- Classrooms
- Offices
- Gym equipment
- Clinics & waiting rooms
- Occupied spaces
Specifications
| EPA Reg. No. | 93908-1 |
|---|---|
| Active ingredient | Hypochlorous acid 0.046% (500 ppm FAC) |
| pH | About 6.5 |
| Application | Trigger sprayer, pump sprayer, mop bucket, cloth |
| Use sites | Hard, non-porous surfaces |
Pre-clean heavily soiled surfaces first. Read and follow all label directions.
Pricing Comes From Your Local Dealer
Each state has one authorized PathX dealer for sales, delivery and training.
